Additionally it is on pin five with a higher voltage level. Installation instructions for a second SID stereo SID often propose to use pin five audio in as the output of the right channel. Due to the RCA plugs used nowadays, instead using the not connected pin 7 is an obvious choice. A matter of some testing.
|Published (Last):||7 April 2005|
|PDF File Size:||3.14 Mb|
|ePub File Size:||17.71 Mb|
|Price:||Free* [*Free Regsitration Required]|
Additionally it is on pin five with a higher voltage level. Installation instructions for a second SID stereo SID often propose to use pin five audio in as the output of the right channel. Due to the RCA plugs used nowadays, instead using the not connected pin 7 is an obvious choice. A matter of some testing. If a TV set has a composite video input it should be preferred over the RF signal, which loses quality by modulation in the C64 and demodulation in the TV set.
Because the signal contains the information of the video brightness and colour it is named composite video signal or CVBS Colour Video Blanking Signal.
S-video is used in many monitors and should also be preferred if using a TV set providing a corresponding input seperate or on the SCART jack. It is then put out together with the internally generated voices through the volume regulation of the SID on the audio output.
Connecting to Commodore monitors[ edit ] Several Commodore monitors included a cable for connecting to this port. This information should be sufficent to find or build a cable for any device configuration. The C64 outputs chroma at a higher voltage level than the s-video standard, you may need a resistor in series to lower the voltage if you for example experience a checkered pattern on colored areas.
Resistance may need to be anywhere from Ohms to 2k Ohms depending on your equipment.
The plugs consist of a circular shielding metal skirt protecting a number of straight round pins. The pins are 1. The skirt is keyed to ensure that the plug is inserted with the correct orientation, and to prevent damage to the pins. The basic design also ensures that the shielding is connected between socket and plug prior to any signal path connection being made. However, as the keying is consistent across all connectors, it does not prevent incompatible connectors from mating, which can lead to damage; this is changed in Mini-DIN , which keys different connectors.
GDIN8-KH Gniazdo DIN 8 pin na kabel (na rysunku typ8C) DIN45326 Hirschmann